NSX CLI Guide

get interface <edge-view-interface-name>

Display information about the specified network interface.

Parameters:

Option Description
<interface-name> Network interface argument


Example:

nsx-edge> get interface eth0 Interface: eth0 IPv4: Address: 192.168.110.111/24 Default gateway: 192.168.110.1 Broadcast address: 0.0.0.0 IPv6: Address: 2620:124:6020:c713:0:a:0:c51/128 Address: 2620:124:6020:c713:445:57ff:feca:bfc5/64 Address: fe80::445:57ff:feca:bfc5/64 Default gateway: fe80::50:56ff:fe56:4453 MAC address: 00:50:56:8e:e8:2e MTU: 1500 Link status: up Admin status: up RX packets: 66493 RX bytes: 12712191 RX errors: 0 RX dropped: 0 TX packets: 58436 TX bytes: 15051574 TX errors: 0 TX dropped: 0 TX collisions: 0

Mode:

Basic

Availability: