Certificates APIs

APIs for managing Certificates

Table of Contents

Install Certificates By Online Mode
Install Certificates By Offline Mode

1. Install Certificates By Online Mode

The following steps have to be followed to install certificates signed by VCF supporting certificate authorities (Microsoft CA and OpenSSL CA).

1.1. Prerequisites API

The SDDC Manager should be up and running.
The resources of the target domain (e.g. MGMT) should be in ACTIVE state.

1.2. Steps API

Check the configured certificate authorities

cURL Request

$ curl 'https://sfo-vcf01.rainpole.io/v1/certificate-authorities' -i -X GET \
    -H 'Authorization: Bearer etYWRta....'

HTTP Request

GET /v1/certificate-authorities HTTP/1.1
Host: sfo-vcf01.rainpole.io
Authorization: Bearer etYWRta....

HTTP Response

HTTP/1.1 200 OK
Content-Type: application/json
Content-Length: 383

{
  "elements" : [ {
    "id" : "OpenSSL",
    "commonName" : "OpenSSL CA",
    "country" : "IN",
    "state" : "Karnataka",
    "locality" : "Bengaluru",
    "organization" : "VMware Inc.",
    "organizationUnit" : "VCF"
  }, {
    "id" : "Microsoft",
    "username" : "Administrator",
    "serverUrl" : "https://sfo-ad.rainpole.io/certsrv",
    "templateName" : "WebServer"
  } ]
}

Tip : Refer to: Get certificate authorities information API

Configure a certificate authority (either "Microsoft" or "OpenSSL") if it is not configured

Configure "Microsoft" certificate authority
cURL Request

$ curl 'https://sfo-vcf01.rainpole.io/v1/certificate-authorities' -i -X PUT \
    -H 'Content-Type: application/json' \
    -H 'Authorization: Bearer etYWRta....' \
    -d '{
  "microsoftCertificateAuthoritySpec" : {
    "username" : "Administrator",
    "secret" : "********",
    "serverUrl" : "https://sfo-ad.rainpole.io/certsrv",
    "templateName" : "WebServer"
  }
}'

HTTP Request

PUT /v1/certificate-authorities HTTP/1.1
Content-Type: application/json
Content-Length: 199
Host: sfo-vcf01.rainpole.io
Authorization: Bearer etYWRta....

{
  "microsoftCertificateAuthoritySpec" : {
    "username" : "Administrator",
    "secret" : "********",
    "serverUrl" : "https://sfo-ad.rainpole.io/certsrv",
    "templateName" : "WebServer"
  }
}

HTTP Response

HTTP/1.1 200 OK

Configure "OpenSSL" certificate authority
cURL Request

$ curl 'https://sfo-vcf01.rainpole.io/v1/certificate-authorities' -i -X PUT \
    -H 'Content-Type: application/json' \
    -H 'Authorization: Bearer etYWRta....' \
    -d '{
  "openSSLCertificateAuthoritySpec" : {
    "commonName" : "OpenSSL CA",
    "country" : "IN",
    "state" : "Karnataka",
    "locality" : "Bengaluru",
    "organization" : "VMware Inc.",
    "organizationUnit" : "VCF"
  }
}'

HTTP Request

PUT /v1/certificate-authorities HTTP/1.1
Content-Type: application/json
Content-Length: 226
Host: sfo-vcf01.rainpole.io
Authorization: Bearer etYWRta....

{
  "openSSLCertificateAuthoritySpec" : {
    "commonName" : "OpenSSL CA",
    "country" : "IN",
    "state" : "Karnataka",
    "locality" : "Bengaluru",
    "organization" : "VMware Inc.",
    "organizationUnit" : "VCF"
  }
}

HTTP Response

HTTP/1.1 200 OK

Tip : Refer to: Create a certificate authority API

Reconfigure the certificate authority if required

Reconfigure "Microsoft" certificate authority
cURL Request

$ curl 'https://sfo-vcf01.rainpole.io/v1/certificate-authorities' -i -X PATCH \
    -H 'Content-Type: application/json' \
    -H 'Authorization: Bearer etYWRta....' \
    -d '{
  "microsoftCertificateAuthoritySpec" : {
    "templateName" : "WebServer"
  }
}'

HTTP Request

PATCH /v1/certificate-authorities HTTP/1.1
Content-Type: application/json
Content-Length: 82
Host: sfo-vcf01.rainpole.io
Authorization: Bearer etYWRta....

{
  "microsoftCertificateAuthoritySpec" : {
    "templateName" : "WebServer"
  }
}

HTTP Response

HTTP/1.1 200 OK

Reconfigure "OpenSSL" certificate authority
cURL Request

$ curl 'https://sfo-vcf01.rainpole.io/v1/certificate-authorities' -i -X PATCH \
    -H 'Content-Type: application/json' \
    -H 'Authorization: Bearer etYWRta....' \
    -d '{
  "openSSLCertificateAuthoritySpec" : {
    "commonName" : "OpenSSL CA"
  }
}'

HTTP Request

PATCH /v1/certificate-authorities HTTP/1.1
Content-Type: application/json
Content-Length: 79
Host: sfo-vcf01.rainpole.io
Authorization: Bearer etYWRta....

{
  "openSSLCertificateAuthoritySpec" : {
    "commonName" : "OpenSSL CA"
  }
}

HTTP Response

HTTP/1.1 200 OK

Tip : Refer to: Configure existing certificate authority API

Verify that the certificate authority is successfully configured by invoking the API with type of CA as the ID (optional)

Verify configuration for "Microsoft" certificate authority
cURL Request

$ curl 'https://sfo-vcf01.rainpole.io/v1/certificate-authorities/Microsoft' -i -X GET \
    -H 'Authorization: Bearer etYWRta....'

HTTP Request

GET /v1/certificate-authorities/Microsoft HTTP/1.1
Host: sfo-vcf01.rainpole.io
Authorization: Bearer etYWRta....

HTTP Response

HTTP/1.1 200 OK
Content-Type: application/json
Content-Length: 142

{
  "id" : "Microsoft",
  "username" : "Administrator",
  "serverUrl" : "https://sfo-ad.rainpole.io/certsrv",
  "templateName" : "WebServer"
}

Verify configuration for "OpenSSL" certificate authority
cURL Request

$ curl 'https://sfo-vcf01.rainpole.io/v1/certificate-authorities/OpenSSL' -i -X GET \
    -H 'Authorization: Bearer etYWRta....'

HTTP Request

GET /v1/certificate-authorities/OpenSSL HTTP/1.1
Host: sfo-vcf01.rainpole.io
Authorization: Bearer etYWRta....

HTTP Response

HTTP/1.1 200 OK
Content-Type: application/json
Content-Length: 190

{
  "id" : "OpenSSL",
  "commonName" : "OpenSSL CA",
  "country" : "IN",
  "state" : "Karnataka",
  "locality" : "Bengaluru",
  "organization" : "VMware Inc.",
  "organizationUnit" : "VCF"
}

Tip : Refer to: Get certificate authority information API

After the successful certificate authority configuration, generate CSR by invoking the API

Tip : If "resources" field is not given then operations are performed on all the resources in the domain.

cURL Request

$ curl 'https://sfo-vcf01.rainpole.io/v1/domains/3E86FBAD-8984-4D4B-992D-F0C49857572A/csrs' -i -X PUT \
    -H 'Content-Type: application/json' \
    -H 'Authorization: Bearer etYWRta....' \
    -d '{
  "csrGenerationSpec" : {
    "country" : "IN",
    "state" : "Karnataka",
    "locality" : "Bengaluru",
    "organization" : "VMware Inc.",
    "organizationUnit" : "VCF",
    "email" : "admin@vmware.com",
    "keySize" : "3072",
    "keyAlgorithm" : "RSA"
  },
  "resources" : [ {
    "fqdn" : "sfo-vc01.rainpole.io",
    "type" : "VCENTER"
  } ]
}'

HTTP Request

PUT /v1/domains/3E86FBAD-8984-4D4B-992D-F0C49857572A/csrs HTTP/1.1
Content-Type: application/json
Content-Length: 352
Host: sfo-vcf01.rainpole.io
Authorization: Bearer etYWRta....

{
  "csrGenerationSpec" : {
    "country" : "IN",
    "state" : "Karnataka",
    "locality" : "Bengaluru",
    "organization" : "VMware Inc.",
    "organizationUnit" : "VCF",
    "email" : "admin@vmware.com",
    "keySize" : "3072",
    "keyAlgorithm" : "RSA"
  },
  "resources" : [ {
    "fqdn" : "sfo-vc01.rainpole.io",
    "type" : "VCENTER"
  } ]
}

HTTP Response

HTTP/1.1 202 Accepted
Location: /v1/tasks/d703df0b-7289-457d-b3a6-3336ebe9bc69
Content-Type: application/json
Content-Length: 131

{
  "id" : "d703df0b-7289-457d-b3a6-3336ebe9bc69",
  "status" : "IN_PROGRESS",
  "isCancellable" : false,
  "isRetryable" : false
}

Tip : Refer to: Generate CSR(s) API

Poll the status of the task using the task API with the ID from the response of the previous API until "status" is not "IN_PROGRESS".

Tip : Refer to: Get a Task.

If the "status" is "SUCCESSFUL", the task is completed successfully.
If the "status" is "FAILED", execute the generate CSR request again.
After successful CSR generation, generate the certificates signed by supported certificates authorities (either OpenSSL or Microsoft) by invoking the API

cURL Request

$ curl 'https://sfo-vcf01.rainpole.io/v1/domains/3E86FBAD-8984-4D4B-992D-F0C49857572A/certificates' -i -X PUT \
    -H 'Content-Type: application/json' \
    -H 'Authorization: Bearer etYWRta....' \
    -d '{
  "caType" : "Microsoft",
  "resources" : [ {
    "fqdn" : "sfo-vc01.rainpole.io",
    "type" : "VCENTER"
  } ]
}'

HTTP Request

PUT /v1/domains/3E86FBAD-8984-4D4B-992D-F0C49857572A/certificates HTTP/1.1
Content-Type: application/json
Content-Length: 115
Host: sfo-vcf01.rainpole.io
Authorization: Bearer etYWRta....

{
  "caType" : "Microsoft",
  "resources" : [ {
    "fqdn" : "sfo-vc01.rainpole.io",
    "type" : "VCENTER"
  } ]
}

HTTP Response

HTTP/1.1 202 Accepted
Location: /v1/tasks/null

Tip : Refer to: Generate certificate(s) for the selected resource(s) in a domain API

Poll the status of the task using the task API with the ID from the response of the previous API until "status" is not "IN_PROGRESS".

Tip : Refer to: Get a Task.

If the "status" is "SUCCESSFUL", the task is completed successfully.
If the "status" is "FAILED", execute the generate certificate request again.
If the generation of certificates is successful, fetch the contents of the generated certificates to check for which resources certificates are generated by invoking the API (optional)

Note : The following will display only the list of certificates generated from the SDDC manager.

cURL Request

$ curl 'https://sfo-vcf01.rainpole.io/v1/domains/3E86FBAD-8984-4D4B-992D-F0C49857572A/certificates' -i -X GET \
    -H 'Authorization: Bearer etYWRta....'

HTTP Request

GET /v1/domains/3E86FBAD-8984-4D4B-992D-F0C49857572A/certificates HTTP/1.1
Host: sfo-vcf01.rainpole.io
Authorization: Bearer etYWRta....

HTTP Response

HTTP/1.1 200 OK
Content-Type: application/json
Content-Length: 949

{
  "elements" : [ {
    "isInstalled" : false,
    "version" : "V3",
    "serialNumber" : "46:85:19:77:36:12:67:26",
    "issuedTo" : "sfo-vc01.rainpole.io",
    "issuedBy" : "CN=OpenSSL CA, OU=VCF, O=VMware, L=Bengaluru, ST=Karnataka, C=IN",
    "notBefore" : "2024-08-27T19:51:07.246Z",
    "notAfter" : "2025-09-29T19:51:07.246Z",
    "signatureAlgorithm" : "SHA256withRSA",
    "subject" : "CN=sfo-vc01.rainpole.io, OU=VCF, O=VMware, L=Bengaluru, ST=Karnataka, C=IN",
    "subjectAlternativeName" : [ "sfo-vc01.rainpole.io" ],
    "publicKey" : "D6:FD:DF:33:F1:...",
    "publicKeyAlgorithm" : "RSA",
    "keySize" : "3072",
    "thumbprintAlgorithm" : "SHA-256",
    "thumbprint" : "59:24:D5:18:04:A0:26:B0:A4:05:EA:82:60:95:82:A2:4B:F6:31:FB:81:93:01:F3:29:7D:34:9C:D3:05:39:90",
    "numberOfDaysToExpire" : 398,
    "expirationStatus" : "ACTIVE",
    "pemEncoded" : "-----BEGIN CERTIFICATE-----\nMIIFq...\n-----END CERTIFICATE-----"
  } ]
}

Tip : Refer to: Get latest generated certificate(s) in a domain API

After successful certificate generation, install the signed certificates on remote resources by invoking the API

cURL Request

$ curl 'https://sfo-vcf01.rainpole.io/v1/domains/3E86FBAD-8984-4D4B-992D-F0C49857572A/certificates' -i -X PATCH \
    -H 'Content-Type: application/json' \
    -H 'Authorization: Bearer etYWRta....' \
    -d '{
  "operationType" : "INSTALL",
  "resources" : [ {
    "fqdn" : "sfo-vc01.rainpole.io",
    "type" : "VCENTER"
  } ]
}'

HTTP Request

PATCH /v1/domains/3E86FBAD-8984-4D4B-992D-F0C49857572A/certificates HTTP/1.1
Content-Type: application/json
Content-Length: 120
Host: sfo-vcf01.rainpole.io
Authorization: Bearer etYWRta....

{
  "operationType" : "INSTALL",
  "resources" : [ {
    "fqdn" : "sfo-vc01.rainpole.io",
    "type" : "VCENTER"
  } ]
}

HTTP Response

HTTP/1.1 202 Accepted
Location: /v1/tasks/cfc1dee8-68ee-474a-be86-14e67fec2c40
Content-Type: application/json
Content-Length: 131

{
  "id" : "cfc1dee8-68ee-474a-be86-14e67fec2c40",
  "status" : "IN_PROGRESS",
  "isCancellable" : false,
  "isRetryable" : false
}

Tip : Refer to: Replace certificate(s) for the selected resource(s) in a domain API

Poll the status of the task using the task API with the ID from the response of the previous API until "status" is not "IN_PROGRESS".

Tip : Refer to: Get a Task.

If the "status" is "SUCCESSFUL", the task is completed successfully.
If the "status" is "FAILED", the task can be re-executed.

Tip : Refer to: Retry a Task

Fetch the installed certificates by invoking the API (optional)

Note : The following will display the list of installed certificates.

cURL Request

$ curl 'https://sfo-vcf01.rainpole.io/v1/domains/3E86FBAD-8984-4D4B-992D-F0C49857572A/resource-certificates' -i -X GET \
    -H 'Authorization: Bearer etYWRta....'

HTTP Request

GET /v1/domains/3E86FBAD-8984-4D4B-992D-F0C49857572A/resource-certificates HTTP/1.1
Host: sfo-vcf01.rainpole.io
Authorization: Bearer etYWRta....

HTTP Response

HTTP/1.1 200 OK
Content-Type: application/json
Content-Length: 22

{
  "elements" : [ ]
}

Tip : Refer to: View certificate of all the resources in a domain API

Warning : Certificate installation will replace the already installed certificates.

Note : The CSRs cannot be fetched after successful certificate installation.

Note : Only singleton object of a particular certificate authority will exist at any point of time in the VCF environment.

Note : Only the latest generated CSRs will exist in the VCF environment after a series of generate CSR operation.

Note : Only the latest generated certificates will exist in the VCF environment after a series of generate certificate operation.

1.3. Related APIs API

[_createcertificateauthority] API [_getcertificateauthorities] API [_getcertificateauthoritybyid] API [_configurecertificateauthority] API [_generatescsrs] API [_getcsrs] API [_generatecertificates] API [_getcertificates] API [_replacecertificates] API [_getcertificatesbydomain] API [_gettasks] API [_gettask] API

2. Install Certificates By Offline Mode

The following steps have to be followed to install certificates signed by external third party certificate authorities.

2.1. Prerequisites API

The SDDC Manager should be up and running.
The resources of the target domain (e.g. MGMT) should be in ACTIVE state.

2.2. Steps API

Generate CSR by invoking the API

cURL Request

$ curl 'https://sfo-vcf01.rainpole.io/v1/domains/3E86FBAD-8984-4D4B-992D-F0C49857572A/csrs' -i -X PUT \
    -H 'Content-Type: application/json' \
    -H 'Authorization: Bearer etYWRta....' \
    -d '{
  "csrGenerationSpec" : {
    "country" : "IN",
    "state" : "Karnataka",
    "locality" : "Bengaluru",
    "organization" : "VMware Inc.",
    "organizationUnit" : "VCF",
    "email" : "admin@vmware.com",
    "keySize" : "3072",
    "keyAlgorithm" : "RSA"
  },
  "resources" : [ {
    "fqdn" : "sfo-vc01.rainpole.io",
    "type" : "VCENTER"
  } ]
}'

HTTP Request

PUT /v1/domains/3E86FBAD-8984-4D4B-992D-F0C49857572A/csrs HTTP/1.1
Content-Type: application/json
Content-Length: 352
Host: sfo-vcf01.rainpole.io
Authorization: Bearer etYWRta....

{
  "csrGenerationSpec" : {
    "country" : "IN",
    "state" : "Karnataka",
    "locality" : "Bengaluru",
    "organization" : "VMware Inc.",
    "organizationUnit" : "VCF",
    "email" : "admin@vmware.com",
    "keySize" : "3072",
    "keyAlgorithm" : "RSA"
  },
  "resources" : [ {
    "fqdn" : "sfo-vc01.rainpole.io",
    "type" : "VCENTER"
  } ]
}

HTTP Response

HTTP/1.1 202 Accepted
Location: /v1/tasks/d703df0b-7289-457d-b3a6-3336ebe9bc69
Content-Type: application/json
Content-Length: 131

{
  "id" : "d703df0b-7289-457d-b3a6-3336ebe9bc69",
  "status" : "IN_PROGRESS",
  "isCancellable" : false,
  "isRetryable" : false
}

Tip : Refer to: Generate CSR(s) API

Poll the status of the task using the task API with the ID from the response of the previous API until "status" is not "IN_PROGRESS".

Tip : Refer to: Get a Task.

If the "status" is "SUCCESSFUL", the task is completed successfully.
If the "status" is "FAILED", execute the generate CSR request again.
If the generation of CSR is successful, either get available CSR(s) in "json" format or download available CSR(s) in ".tar.gz" format.

Get available CSR(s) in "json" format
cURL Request

$ curl 'https://sfo-vcf01.rainpole.io/v1/domains/3E86FBAD-8984-4D4B-992D-F0C49857572A/csrs' -i -X GET \
    -H 'Authorization: Bearer etYWRta....'

HTTP Request

GET /v1/domains/3E86FBAD-8984-4D4B-992D-F0C49857572A/csrs HTTP/1.1
Host: sfo-vcf01.rainpole.io
Authorization: Bearer etYWRta....

HTTP Response

HTTP/1.1 200 OK
Content-Type: application/json
Content-Length: 227

{
  "elements" : [ {
    "csrEncodedContent" : "-----BEGIN CERTIFICATE REQUEST-----\nMIIEH...\n-----END CERTIFICATE REQUEST-----",
    "resource" : {
      "fqdn" : "sfo-vc01.rainpole.io",
      "type" : "VCENTER"
    }
  } ]
}

Tip : Refer to: Get available CSR(s) in json format API

Download available CSR(s) in ".tar.gz" format
cURL Request

$ curl 'https://sfo-vcf01.rainpole.io/v1/domains/3E86FBAD-8984-4D4B-992D-F0C49857572A/csrs/downloads' -i -X GET \
    -H 'Authorization: Bearer etYWRta....'

HTTP Request

GET /v1/domains/3E86FBAD-8984-4D4B-992D-F0C49857572A/csrs/downloads HTTP/1.1
Host: sfo-vcf01.rainpole.io
Authorization: Bearer etYWRta....

HTTP Response

HTTP/1.1 200 OK
Content-Type: application/octet-stream
Content-Length: 24
Content-Disposition: attachment; filename="MGMT.tar.gz"
Accept-Ranges: bytes

<binary .tar.gz content>

Tip : Refer to: Download available CSR(s) in tar.gz format API

Use the downloaded CSRs to have it manually signed by external certificate authorities.
Validate the signed certificate before installation by invoking the API (optional)

cURL Request

$ curl 'https://sfo-vcf01.rainpole.io/v1/domains/3E86FBAD-8984-4D4B-992D-F0C49857572A/resource-certificates/validations' -i -X PUT \
    -H 'Content-Type: application/json' \
    -H 'Authorization: Bearer etYWRta....' \
    -d '[ {
  "resourceFqdn" : "sfo-vc01.rainpole.io",
  "resourceCertificate" : "-----BEGIN CERTIFICATE-----\nMIIFq...\n-----END CERTIFICATE-----",
  "caCertificate" : "-----BEGIN CERTIFICATE-----\nMIIFq...\n-----END CERTIFICATE-----\n-----BEGIN CERTIFICATE-----\nMIIFq...\n-----END CERTIFICATE-----"
}, {
  "resourceId" : "BE8A5E04-92A0-43F6-A166-AA041F4327CC",
  "certificateChain" : "-----BEGIN CERTIFICATE-----\nMIIFq...\n-----END CERTIFICATE-----\n-----BEGIN CERTIFICATE-----\nMIIFq...\n-----END CERTIFICATE-----\n-----BEGIN CERTIFICATE-----\nMIIFq...\n-----END CERTIFICATE-----"
} ]'

HTTP Request

PUT /v1/domains/3E86FBAD-8984-4D4B-992D-F0C49857572A/resource-certificates/validations HTTP/1.1
Content-Type: application/json
Content-Length: 581
Host: sfo-vcf01.rainpole.io
Authorization: Bearer etYWRta....

[ {
  "resourceFqdn" : "sfo-vc01.rainpole.io",
  "resourceCertificate" : "-----BEGIN CERTIFICATE-----\nMIIFq...\n-----END CERTIFICATE-----",
  "caCertificate" : "-----BEGIN CERTIFICATE-----\nMIIFq...\n-----END CERTIFICATE-----\n-----BEGIN CERTIFICATE-----\nMIIFq...\n-----END CERTIFICATE-----"
}, {
  "resourceId" : "BE8A5E04-92A0-43F6-A166-AA041F4327CC",
  "certificateChain" : "-----BEGIN CERTIFICATE-----\nMIIFq...\n-----END CERTIFICATE-----\n-----BEGIN CERTIFICATE-----\nMIIFq...\n-----END CERTIFICATE-----\n-----BEGIN CERTIFICATE-----\nMIIFq...\n-----END CERTIFICATE-----"
} ]

HTTP Response

HTTP/1.1 201 Created
Location: /v1/domains/3E86FBAD-8984-4D4B-992D-F0C49857572A/resource-certificates/validations/B1930850-7D1A-4BAA-89D7-52FD5DAD196A
Content-Type: application/json
Content-Length: 524

{
  "validationId" : "B1930850-7D1A-4BAA-89D7-52FD5DAD196A",
  "startTimestamp" : "2024-08-27T19:51:08.185841461Z",
  "completed" : false,
  "validations" : [ {
    "resourceFqdn" : "sfo-vc01.rainpole.io",
    "startTimestamp" : "2024-08-27T19:51:08.185841461Z",
    "endTimestamp" : "2024-08-27T19:51:13.185884833Z",
    "validationStatus" : "SUCCESSFUL"
  }, {
    "resourceId" : "BE8A5E04-92A0-43F6-A166-AA041F4327CC",
    "startTimestamp" : "2024-08-27T19:51:08.185841461Z",
    "validationStatus" : "INPROGRESS"
  } ]
}

Tip : Refer to: Validate resource certificates API

Poll the status of the certificate validation using the validation task API with the validation ID from the response of the previous API until "completed" is not "true".

cURL Request

$ curl 'https://sfo-vcf01.rainpole.io/v1/domains/3E86FBAD-8984-4D4B-992D-F0C49857572A/resource-certificates/validations/B1930850-7D1A-4BAA-89D7-52FD5DAD196A' -i -X GET \
    -H 'Authorization: Bearer etYWRta....'

HTTP Request

GET /v1/domains/3E86FBAD-8984-4D4B-992D-F0C49857572A/resource-certificates/validations/B1930850-7D1A-4BAA-89D7-52FD5DAD196A HTTP/1.1
Host: sfo-vcf01.rainpole.io
Authorization: Bearer etYWRta....

HTTP Response

HTTP/1.1 200 OK
Content-Type: application/json
Content-Length: 676

{
  "validationId" : "B1930850-7D1A-4BAA-89D7-52FD5DAD196A",
  "startTimestamp" : "2024-08-27T19:51:07.906844880Z",
  "endTimestamp" : "2024-08-27T19:51:12.906948531Z",
  "completed" : true,
  "validations" : [ {
    "resourceFqdn" : "sfo-vc01.rainpole.io",
    "startTimestamp" : "2024-08-27T19:51:07.906844880Z",
    "endTimestamp" : "2024-08-27T19:51:12.906948531Z",
    "validationStatus" : "SUCCESSFUL"
  }, {
    "resourceId" : "BE8A5E04-92A0-43F6-A166-AA041F4327CC",
    "startTimestamp" : "2024-08-27T19:51:07.906844880Z",
    "endTimestamp" : "2024-08-27T19:51:12.906948531Z",
    "validationStatus" : "FAILED",
    "validationMessage" : "Certificate Expired"
  } ]
}

Tip : Refer to: Get the resource certificate validation result API

If the certificate validation is successful, the signed certificates can be uploaded and installed in either ".tar.gz" format or in "json" format.

Upload and install signed certificates in ".tar.gz" format

Create a ".tar.gz" file with the following directory structure:
- The name of the top-level directory must exactly match the name of the domain to which certificates are to be installed.
- The PEM-encoded root CA certificate chain file (rootca.crt) must reside inside this top-level directory.
- This directory must contain one sub-directory for each component resource and the name of each sub-directory must exactly match the resource fqdn.
- Each sub-directory must contain a corresponding ".crt" file, whose name must exactly match the resource fqdn followed by ".crt" extension.
Upload the packaged signed certificates by invoking the API

cURL Request Unresolved directive in usecases/install_certificates_by_offline_mode.adoc - include::../certificatemanager/upload_certificate_v1/curl-request.adoc[]
HTTP Request Unresolved directive in usecases/install_certificates_by_offline_mode.adoc - include::../certificatemanager/upload_certificate_v1/http-request.adoc[]
HTTP Response Unresolved directive in usecases/install_certificates_by_offline_mode.adoc - include::../certificatemanager/upload_certificate_v1/http-response.adoc[]

Tip : Refer to: Upload certificates to the certificate store API

After successful upload operation, install the signed certificates on remote resources by invoking the API

cURL Request

$ curl 'https://sfo-vcf01.rainpole.io/v1/domains/3E86FBAD-8984-4D4B-992D-F0C49857572A/certificates' -i -X PATCH \
    -H 'Content-Type: application/json' \
    -H 'Authorization: Bearer etYWRta....' \
    -d '{
  "operationType" : "INSTALL",
  "resources" : [ {
    "fqdn" : "sfo-vc01.rainpole.io",
    "type" : "VCENTER"
  } ]
}'

HTTP Request

PATCH /v1/domains/3E86FBAD-8984-4D4B-992D-F0C49857572A/certificates HTTP/1.1
Content-Type: application/json
Content-Length: 120
Host: sfo-vcf01.rainpole.io
Authorization: Bearer etYWRta....

{
  "operationType" : "INSTALL",
  "resources" : [ {
    "fqdn" : "sfo-vc01.rainpole.io",
    "type" : "VCENTER"
  } ]
}

HTTP Response

HTTP/1.1 202 Accepted
Location: /v1/tasks/cfc1dee8-68ee-474a-be86-14e67fec2c40
Content-Type: application/json
Content-Length: 131

{
  "id" : "cfc1dee8-68ee-474a-be86-14e67fec2c40",
  "status" : "IN_PROGRESS",
  "isCancellable" : false,
  "isRetryable" : false
}

Tip : Refer to: Replace certificate(s) for the selected resource(s) in a domain API

Poll the status of the task using the task API with the ID from the response of the previous API until "status" is not "IN_PROGRESS".

Tip : Refer to: Get a Task.

If the "status" is "SUCCESSFUL", the task is completed successfully.
If the "status" is "FAILED", the task can be re-executed.

Tip : Refer to: Retry a Task

Upload and install signed certificates in "json" format
cURL Request

$ curl 'https://sfo-vcf01.rainpole.io/v1/domains/3E86FBAD-8984-4D4B-992D-F0C49857572A/resource-certificates' -i -X PUT \
    -H 'Content-Type: application/json' \
    -H 'Authorization: Bearer etYWRta....' \
    -d '[ {
  "resourceFqdn" : "sfo-vc01.rainpole.io",
  "resourceCertificate" : "-----BEGIN CERTIFICATE-----\nMIIFq...\n-----END CERTIFICATE-----",
  "caCertificate" : "-----BEGIN CERTIFICATE-----\nMIIFq...\n-----END CERTIFICATE-----\n-----BEGIN CERTIFICATE-----\nMIIFq...\n-----END CERTIFICATE-----"
}, {
  "resourceId" : "BE8A5E04-92A0-43F6-A166-AA041F4327CC",
  "certificateChain" : "-----BEGIN CERTIFICATE-----\nMIIFq...\n-----END CERTIFICATE-----\n-----BEGIN CERTIFICATE-----\nMIIFq...\n-----END CERTIFICATE-----\n-----BEGIN CERTIFICATE-----\nMIIFq...\n-----END CERTIFICATE-----"
} ]'

HTTP Request

PUT /v1/domains/3E86FBAD-8984-4D4B-992D-F0C49857572A/resource-certificates HTTP/1.1
Content-Type: application/json
Content-Length: 581
Host: sfo-vcf01.rainpole.io
Authorization: Bearer etYWRta....

[ {
  "resourceFqdn" : "sfo-vc01.rainpole.io",
  "resourceCertificate" : "-----BEGIN CERTIFICATE-----\nMIIFq...\n-----END CERTIFICATE-----",
  "caCertificate" : "-----BEGIN CERTIFICATE-----\nMIIFq...\n-----END CERTIFICATE-----\n-----BEGIN CERTIFICATE-----\nMIIFq...\n-----END CERTIFICATE-----"
}, {
  "resourceId" : "BE8A5E04-92A0-43F6-A166-AA041F4327CC",
  "certificateChain" : "-----BEGIN CERTIFICATE-----\nMIIFq...\n-----END CERTIFICATE-----\n-----BEGIN CERTIFICATE-----\nMIIFq...\n-----END CERTIFICATE-----\n-----BEGIN CERTIFICATE-----\nMIIFq...\n-----END CERTIFICATE-----"
} ]

HTTP Response

HTTP/1.1 202 Accepted
Location: /v1/tasks/9760dd1a-6bb7-4c4d-bff7-800a5a933c8f
Content-Type: application/json
Content-Length: 131

{
  "id" : "9760dd1a-6bb7-4c4d-bff7-800a5a933c8f",
  "status" : "IN_PROGRESS",
  "isCancellable" : false,
  "isRetryable" : false
}

Tip : Refer to: Replace resource certificates API

Poll the status of the task using the task API with the ID from the response of the previous API until "status" is not "IN_PROGRESS".

Tip : Refer to: Get a Task.

If the "status" is "SUCCESSFUL", the task is completed successfully.
If the "status" is "FAILED", the task can be re-executed.

Tip : Refer to: Retry a Task

Fetch the installed certificates by invoking the API (optional)

cURL Request

$ curl 'https://sfo-vcf01.rainpole.io/v1/domains/3E86FBAD-8984-4D4B-992D-F0C49857572A/resource-certificates' -i -X GET \
    -H 'Authorization: Bearer etYWRta....'

HTTP Request

GET /v1/domains/3E86FBAD-8984-4D4B-992D-F0C49857572A/resource-certificates HTTP/1.1
Host: sfo-vcf01.rainpole.io
Authorization: Bearer etYWRta....

HTTP Response

HTTP/1.1 200 OK
Content-Type: application/json
Content-Length: 22

{
  "elements" : [ ]
}

Tip : Refer to: View certificate of all the resources in a domain API

Warning : Certificate installation will replace the already installed certificates.

Note : The CSRs cannot be fetched or downloaded after successful certificate installation.

Note : Only the latest generated CSRs will exist in the VCF environment after a series of generate CSR operation.

Note : Only the latest uploaded certificates will exist in the VCF environment after a series of upload certificate operation.

2.3. Related APIs API

[_generatescsrs] API [_getcsrs] API [_downloadcsr] API [_uploadcertificates] API [_validateresourcecertificates] API [_getresourcecertificatesvalidationresult] API [_replacecertificates] API [_replaceresourcecertificates] API [_getcertificatesbydomain] API [_gettasks] API [_gettask] API
Last updated 2024-08-27 16:13:54 -0700

Operations

GET

Get Certificates By Domain

Retrieve the certificate details for all resources in a domain

PUT

Replace Resource Certificates

Replace the certificate(s) for selected resources of a domain

PUT

Validate Resource Certificates

Perform validation of the ResourceCertificateSpec specification

GET

Get CS Rs